Network Video Recorder User Manual
22
6. Optional: Enable Stream Encryption. It requires to enter verification code in remote access and
live view after this function is enabled.
7. Optional: Enable Sub-Stream Self-Adaptive Bitrate. When the network environment is poor, the
device would automatically adjust video bitrate to ensure playing fluency.
8. Optional: Edit Server IP.
9. Bind your device with a HiLookVision account.
1) Use a smart phone to scan the QR code, and download HiLookVision app. You can also
download it from https://appstore.hikvision.com, or the QR code below. Refer to
HiLookVision Mobile Client User Manual for details.
Figure 5-5 Download HiLookVision
2) Use HiLookVision to scan the device QR, and bind the device.
Note
● If the device is already bound with an account, you can click Unbind to unbind with the
current account.
● You can also use the QR code in at the upper-left corner to download HiLookVision and
bind your device.
10. Click Apply.
What to do next
You can access your video recorder via HiLookVision.
5.2.3 Email
Set an email account to receive event notification.
Before You Start
● Ensure SMTP service is available for your email.
● Configure your network parameters. Refer to General for details.
Steps
1. Go to Configuration → Network → Email.
To Next Page
Loading...
Need help?
General
