Network Video Recorder User Manual
76
Figure 6-31 Quota
Note
When the quota capacity is set to 0, all cameras will use the total capacity of HDD for videos and
pictures.
5. Click Apply.
6. Restart the video recorder to activate the new settings.
6.5.5 Advanced Settings
Steps
1. Go to Configuration → Record → Advanced.
2. Configure the parameters as your desire.
Overwrite
● Disable: When the HDD is full, video recorder will stop writing.
● Enable: When hard drive is full, video record will continue to write new files by deleting the
oldest files.
Enable HDD Sleeping
HDDs which are free of working for a long time will turn into sleep status.
Save Camera VCA Data
Camera VCA data will be saved so that you can search it.
Alarm Storage
When the HDD free space is not enough, you can disable it to save space, but your device will
stop storing alarm information.
Picture Storage
When the HDD free space is not enough, you can disable it to save space, but your device will
stop storing pictures.
To Next Page
Loading...
Need help?
General
