HIKVISION HiLook NVR 108MH-C/8P - Motion Detection Configuration

Network Video Recorder User Manual
58
6.3.3 Privacy Mask
You are allowed to configure the privacy mask areas that cannot be viewed or recorded.
Steps
1. Go to Configuration → Camera → Privacy Mask.
2. Select Camera.
3. Turn on Enable.
Figure 6-18 Privacy Mask
4. Drag to draw an area on the window. The frames of the areas will be marked with different
colors.
Note
Up to 4 privacy mask areas can be configured. The size of each area can be adjusted.
5. Click Apply.