Hill-Rom Affinity Three Birthing Bed - Slipcovers (Head and Foot)-P3628 C, P3627 C, P3630 B and P3631 B; Slipcover Upgrade Kits-P3730 A and P3731 A; Push Handles-P1983 A01

Accessories
32 Affinity® Three Birthing Bed and Affinity® Four Birthing Bed User Manual (USR025 REV 6)
Slipcovers (Head and Foot)—P3628C, P3627C, P3630B and P3631B
Head
The head section slipcover is simply placed over the head section mattress for
protection from normal wear and tear and from fluids.
Foot Section Slipcovers
The foot section slipcover is simply placed over the foot section mattress for protection
from normal wear and tear and from fluids.
Slipcover Upgrade Kits—P3730A and P3731A
These upgrade kits enables upgrade from Affinity® Four Birthing Bed lift off to “Stow and Go™” foot section. The
P3730 is for the U-cut slipcover and the P3731 is for the V-cut slipcover.
Push Handles—P1983A01
The push handles are located on the head end of the bed and are used to move the bed.
Remove from the Stowed Position
Pull the push handles upward until they lock in position.
Number Description
P3627C Slipcover, head section, straight edge
P3628C Slipcover, head section, V-cut,
P3630B Slipcover, foot section, straight edge
P3631B Slipcover, foot section, V-cut
Head Section Slip Cover