Hill-Rom Trumpf Medical iLED 7 User Manual (English)

Questions and Answers:

B
Beth FergusonAug 15, 2025
What to do if the Hill-Rom Trumpf Medical iLED 7 Medical Equipment light does not illuminate?
- Y
  ylopezAug 15, 2025
  If your Hill-Rom Medical Equipment light does not illuminate, first, ensure the main switch in the operating room is on. Check that the lamp head hasn't been switched off at the control element; if so, press the ON/OFF switch. For mobile pedestal versions, verify the mains cable is plugged in and the power pack is switched on. Also, check the local fuses and power supply. If none of these steps work, the electronics may be faulty, and you should contact Technical Customer Service.
B
Brittany Li DDSAug 18, 2025
How to fix different color temperatures in the field of illumination on Hill-Rom Trumpf Medical iLED 7?
- A
  anastewartAug 18, 2025
  If you experience different color temperatures in the field of illumination with your Hill-Rom Medical Equipment, it might be because the color temperature is only set on one light. To resolve this, switch on the Sync function.
M
Mrs. Lindsay Taylor MDAug 21, 2025
How to stop Hill-Rom Medical Equipment lamp head from falling or rising?
- T
  Tyler BaileyAug 21, 2025
  If the Hill-Rom Medical Equipment lamp head falls or rises unexpectedly, it indicates that the spring force in the spring arm is either too low or too high. You should adjust the spring force to correct this issue.
B
bhodgesAug 25, 2025
What to do if Hill-Rom Trumpf Medical iLED 7 lamp head is difficult to move?
- K
  Katie FrenchAug 25, 2025
  If the Hill-Rom Medical Equipment lamp head is difficult or too easy to move, the brakes are likely set too firmly or lightly. Adjust the brakes to achieve the desired movement resistance.
J
Joshua WilliamsAug 27, 2025
How to increase lighting intensity on Hill-Rom Trumpf Medical iLED 7 Medical Equipment?
- O
  ogriffinAug 27, 2025
  If the lighting intensity of your Hill-Rom Medical Equipment is too low, the brightness setting is likely too low. Increase the brightness to achieve the desired lighting intensity.
M
Megan BrownAug 30, 2025
What to do if the Hill-Rom Trumpf Medical iLED 7 Medical Equipment light cannot be operated with the Control?
- A
  Angela BassAug 30, 2025
  If the Hill-Rom Medical Equipment cannot be operated with the Control, there may be a fault in the WLAN connection. You can control lighting intensity using the control element on the lamp head.
K
kristy60Sep 2, 2025
How to fix damaged hand grips on Hill-Rom Trumpf Medical iLED 7?
- D
  Darlene AdkinsSep 2, 2025
  If you notice the hand grips on your Hill-Rom Medical Equipment are damaged or exhibit cracks, it means they've reached the end of their useful life. Replace the hand grips to resolve this issue.
J
Jacob LopezSep 5, 2025
How to fix uneven field of illumination on Hill-Rom Trumpf Medical iLED 7 Medical Equipment?
- D
  Diane MerrittSep 6, 2025
  If the field of illumination is uneven on your Hill-Rom Medical Equipment, it's likely that the lamp head is positioned outside the work area. Adjust the position of the lamp head to ensure it's correctly illuminating the intended area.
T
Timothy JohnstonSep 8, 2025
Why is the service life of sterilizable hand grips on Hill-Rom Trumpf Medical iLED 7 too short?
- K
  Kimberly SchultzSep 8, 2025
  If the service life of the sterilizable hand grips on your Hill-Rom Medical Equipment is too short, it's probably due to using an unapproved sterilization method. Ensure you are using the sterilization method described in this manual.
R
Randy JamesSep 12, 2025
What to do after a shock / impact on Hill-Rom Trumpf Medical iLED 7 Medical Equipment light?
- S
  sflynnSep 12, 2025
  If the Hill-Rom Medical Equipment light experiences a shock or impact, switch the lamp head off and on again.

Hill-Rom Trumpf Medical iLED 7 Specifications

General

Brand	Hill-Rom
Model	Trumpf Medical iLED 7
Category	Medical Equipment
Language	English

Summary

Instruction Manual

iLED® 7 Lighting System Overview

Introduction to the iLED® 7 lighting system.

How to Contact Us

Technical Customer Service Contact

Provides contact details for technical support and service.

1 Safety Instructions

Structure of Safety Information

Explains signal words, warning symbols, and pictograms.

Graphic Symbols Used in Safety Instructions

Details safety symbols for hazards like gas explosion and electric shock.

Overview of Most Important Safety Instructions

Highlights key safety warnings for device operation.

Specific Safety Precautions

Covers electrostatic balancing, eye safety, and pinch hazards.

2 Important Information for Safe Use

Groups of Individuals and Operator Information

Defines user roles and operator responsibilities for safe use.

Initial Commissioning and Manual Availability

Covers initial setup requirements and instruction manual access.

Proper and Improper Use Guidelines

Specifies correct usage and prohibits incorrect operations.

Ambient Conditions and Disposal

Details environmental requirements and end-of-life disposal procedures.

3 The Technology of the Lighting System

Lamp Head Description and Functions

Describes the lamp head features including intensity, ALC plus, and Sync.

LED Illuminant Technology

Details the advantages of LED illuminants like lifespan and low heat.

4 Overview of Abbreviations and Terms

5 Identification of the Lighting System

Use and Position of Serial Numbers

Explains how to identify the system and its components using serial numbers.

Scope of Delivery

Lists the items included in the iLED® 7 system package.

6 Description of the Device and Its Functions

Components of the Lighting System

Details hardware components like lamp head, control, and dock desk.

Ceiling-mounted Version Details

Describes designs, components, and movement ranges for ceiling systems.

Mobile Pedestal Version Details

Details designs, components, power supply, and movement ranges.

Positioning and Operation of Lamp Head

Covers non-sterile, sterile positioning, and operating element functions.

7 Commissioning

Pre-Use Checks and System Positioning

Covers checking the system, positioning, and collision risks.

Commissioning Mobile Pedestal Version

Details positioning and connecting the mobile pedestal version.

Dock Desk Setup and Power Connection

Guides on locating, connecting, and replacing the dock desk power pack.

Control / WallControl Panel Management

Covers bumper replacement, charging, power, and inspections.

8 Daily Use of the Surgical Lighting System

Prescribed Steps and Pre-Operation Checks

Outlines routine steps before and after operations.

Safety Warnings During Daily Use

Covers warnings for eye injuries, charge balancing, and vision impairment.

User-Specific Configuration and Accessory Handling

Details coupling/decoupling grip adapters and fitting/removing sterile hand grips.

9 Operating the OR Light Directly on the Operating Element

Switching Lamp Head On/Off and Disconnecting System

Explains how to turn the lamp head on, off, and disconnect the system.

Adjusting Lighting Intensity

Describes how to increase or decrease lighting intensity levels.

Activating/Deactivating Radio Connection/Safe Mode

Details how to manage the radio connection and safe mode.

Light Functions Overview

Introduces ALC plus, illumination diameter, shadow management, and color temperature.

10 Operating the OR Light with TruRemote Software

Control / WallControl Panel Operation Basics

Covers panel operation, unlocking, energy saving, and safety checks.

Adjusting Settings and Synchronization

Guides on accessing settings, changing room names, and defining synchronization.

TruRemote Software Structure and GUI

Explains the software structure and graphical user interface elements.

Operating the Light via Software

Details switching light on/off, adjusting light, and managing functions.

11 Cleaning, Disinfection and Sterilization

General Cleaning and Disinfection Guidelines

Covers power disconnection, general cleaning, and disinfectant usage.

Sterilization of OR Light Hand Grips

Provides instructions for preparing, cleaning, and sterilizing hand grips.

Cleaning, Disinfection, Sterilization of External Control Units

Details cleaning procedures for control panels, bumpers, and dock desks.

12 Inspections and Maintenance

Inspections During Operation

Covers pre/post-use checks, handling defective parts, and weekly inspections.

Annual and Two-Year Maintenance

Outlines requirements for annual visual inspections and bi-annual maintenance.

13 Adjustments

Adjusting Swivel Ranges (Mobile and Spring Arm)

Guides on adjusting swivel ranges for mobile pedestal and spring arm systems.

Setting Spring and Brake Forces

Details how to set spring force and braking force for support arm components.

14 High-Wear Parts

15 Troubleshooting

Common Error Categories

Lists potential issues in mounting, optical systems, operation, and grips.

16 Technical Data

Equipment, Device, and Mechanical Data

Provides specs for light equipment, IP classification, electrical data, and mechanical details.

Light Technology Data

Details lighting intensity, dimming, illumination field, and LED performance.

EMC Information and Immunity Guidelines

Covers EMC notes, system guidelines, and immunity standards.

17 List of Components

iLED® 7 Components and Accessories

Lists all available components and accessories for the iLED® 7 system.

TRUMPF Medizin Systeme GmbH + Co. KG

Head Office and Branch Offices

Provides company contact information and office locations.

Related product manuals

Trumpf Medical TruLight 5000

92 pages

Trumpf Medical TruLight 1000

58 pages

Hill-Rom Affinity Three

308 pages

Hill-Rom TotalCare P1830A