How to fix Hilti BX 3-BT when the spring element is not tensioned and there is no status indication?
If the spring element isn't tensioned and there's no status indication, the battery may be empty or not fitted correctly. Try changing the battery or inserting it correctly.
Why is the fastener driven at an angle with my Hilti BX 3-BT Power Tool?
A fastener might be driven at an angle if too much contact pressure is applied or if the fastening tool was angled off the driving axis. Apply less pressure to press the fastening tool against the surface. Also, ensure you press the fastening tool at right angles against the surface, applying pressure to the grip surface on the back of the tool.
What to do if Hilti Power Tool spring element is not tensioned, the status indicator blinks green, and 1 battery charge status LED blinks?
If the spring element is not tensioned, the status indicator blinks green, and one battery charge status LED blinks, the battery may be empty or the battery temperature may be too low. Try changing the battery or allow the battery to warm up slowly to room temperature.
Why is my Hilti Power Tool spring element not re-tensioned, the status indicator blinks green, and 4 battery charge status LEDs blink?
If the spring element isn't re-tensioned, the status indicator blinks green, and 4 battery charge status LEDs blink, the fastening tool may have overheated. Allow the fastening tool to cool down.
What does it mean when the Hilti BX 3-BT Power Tool spring element is not tensioned and the status indicator blinks red?
If the spring element isn't tensioned and the status indicator blinks red, the fastener guide may not be fitted correctly. Try inserting the fastener guide.
What to do if the Hilti Power Tool spring element is not tensioned and the status indicator lights red?
If the spring element is not tensioned and the status indicator lights red, there may be a system fault. Remove the battery or insert the battery.
General| Battery Voltage | 22 V |
|---|---|
| Magazine capacity | 30 nails |
| Power source | Battery |
| Battery type | Li-ion |
| Battery Capacity | 5.2 Ah |
| Fastener type | Nails |
| Base materials | Wood |
| Charging Time | 30 minutes |
Prerequisite for safe, trouble-free handling and use of the product.
Alerts persons to hazards that occur when handling or using the product.
Displays symbols that can be used on the Hilti product for operation and safety.
Details product type, generation, and serial number for reference.
Statement of compliance with applicable directives and standards.
Read all safety warnings and instructions to prevent electric shock, fire, and serious injury.
Keep work area clean, well lit, and avoid explosive atmospheres.
Avoid body contact with earthed surfaces and protect against rain or wet conditions.
Stay alert, use common sense, wear PPE, and avoid awkward postures.
Do not force the tool, use the correct tool, maintain it, and store it safely.
Recharge only with specified chargers and use correct battery packs.
Handle tacker with care, assume fasteners are loaded, and do not point at yourself or others.
Only trained users may operate; wear eye protection, hard hat, and hearing protection.
Check for damage, use correct tools, and store securely.
Identifies and labels all parts of the fastening tool for user reference.
Designed for driving threaded studs (X-BT) into steel with approved accessories.
Enables wireless communication for data transfer when the tool is powered on.
Provides information on the tool's operating status, readiness, and potential issues.
Displays the battery's remaining charge level when release buttons are pressed.
Lists the components included in the product package.
Details specifications like weight, dimensions, application temperatures, and driving rate.
Specifies operating voltage, ambient temperature, and charging temperature.
Provides measured sound pressure and vibration levels according to standards.
Instructions for inserting, removing, and charging the battery.
Steps to remove and insert the fastener guide from the tool.
Adjusts the tool for the desired fastener driving depth and checks quality.
Procedures for switching the fastening tool on and off.
Steps for correctly driving a fastener, including safety precautions.
Manual deactivation of the Bluetooth interface on the tool.
Instructions for cleaning and maintaining the tool and its lithium-ion batteries.
Safety precautions for transporting the tool, especially with batteries.
Guidelines for storing the tool and batteries safely and appropriately.
Proper methods for disposing of batteries to avoid health hazards.
To Next Page
