EasyManuals Logo

Hilti C 4/36-DC Operating Instruction

Hilti C 4/36-DC
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
English 5
function correctly. If parts are damaged, have the parts repaired before
using the appliance.
Use chargers and the corresponding batteries in accordance with these
instructions and as is specified for this particular model. Use of chargers
for applications different from those intended could result in hazardous
situations.
Recharge the batteries only with the chargers specified by the manufac-
turer. A charger that is suitable for a certain type of battery may present a
risk of fire when used with other types of battery.
When not in use, keep the battery and the charger away from paper clips,
coins, keys, nails, screws or other small metal objects that could cause
a short circuit at the battery terminals or the charging contacts. A short
circuit between the battery terminals or charging contacts may cause
injuries (burns) and result in fire.
Under abusive conditions, liquid may be ejected from the battery. Avoid
contact with the liquid. If contact accidentally occurs, flush with water. If
the liquid contacts the eyes, also seek medical attention. Liquid leaking
from the battery may cause irritation or burns.
Make sure that the batteries suffer no mechanical damage.
Do not charge or continue to use damaged batteries (e.g. batteries with
cracks, broken parts, bent or pushed-in and/or pulled-out contacts).
2.3 Careful handling and use of batteries
Observe the special guidelines applicable to the transport, storage and
use of lithium-ion batteries.
Do not expose batteries to high temperatures, direct sunlight or fire.
Do not take apart, squash or incinerate batteries and do not subject them
to temperatures over 80 °C.
Do not attempt to charge or continue to use damaged batteries.
If the battery is too hot to touch, it may be defective. In this case, place
the power tool in a non-flammable location, well away from flammable
materials, where it can be kept under observation and left to cool down.
Contact Hilti Service after the battery has cooled down.
Printed: 20.07.2017 | Doc-Nr: PUB / 5253187 / 000 / 05

Other manuals for Hilti C 4/36-DC

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hilti C 4/36-DC and is the answer not in the manual?

Hilti C 4/36-DC Specifications

General IconGeneral
BrandHilti
ModelC 4/36-DC
CategoryBattery Charger
LanguageEnglish

Related product manuals