What to do if LED 1 is red and LED 2 is off on Hilti C 4/12-50 Battery Charger?
If the LED 1 is red and LED 2 is off on your Hilti Battery Charger, it indicates a charger malfunction. Try unplugging the charger and then plugging it back in. If the LED still doesn't light up, the charger should be taken to Hilti Service for repair.
How to troubleshoot when LED 1 is green and LED 2 is off on a Hilti Battery Charger?
If LED 1 shows green and LED 2 is off on the Hilti Battery Charger, the battery may be defective. Remove the battery from the charger. If no LED shows on the battery after activating the state of charge indicator, it means that the battery is defective and should be checked by Hilti Service.
What to do if LED 1 and LED 2 are off on Hilti C 4/12-50?
If both LED 1 and LED 2 are off on your Hilti Battery Charger, it suggests that the charger itself is defective. In this case, have the tool repaired by Hilti Service.
What to do if LED 1 lights up red and LED 2 is off on my Hilti C 4/12-50 Battery Charger?
This indicates a charger malfunction. Unplug the Hilti Battery Charger and then plug it back in. If the LED still doesn’t light, take the charger to Hilti Service.
Why is LED 1 blinking red on my Hilti C 4/12-50 and LED 2 is off?
This means the battery is either too hot or too cold to charge. The Hilti Battery Charger will automatically begin charging once the battery reaches the correct temperature.
What to do if LED 1 lights up green and LED 2 is off on my Hilti C 4/12-50 Battery Charger?
This indicates that the battery may be defective. Remove the battery from the charger. If no LED lights on the battery after activating the state of charge indicator, the battery is defective. Have the battery checked by Hilti Service.
How to troubleshoot when LED 1 and LED 2 are off on Hilti C 4/12-50 Battery Charger?
When both LED 1 and LED 2 are off, it means that the charger is defective. Have the Hilti Battery Charger repaired by Hilti Service.
Information about product design, users, and identification.
Essential safety advice for operating power tools.
Guidelines for safe use and care of the battery charger.
Crucial safety instructions for handling Li-ion batteries.
Specifies the product's purpose and voltage compatibility.
Procedures for charging the battery correctly.
Solutions for common problems encountered with the charger.
General| Product type | Battery & charger set |
|---|---|
| Suitable for | - |
| Input voltage | 230 V |
| Product color | Black, Red |
| Battery voltage | - V |
| Battery capacity | 12 Ah |
| Charging current | 4 A |
| Charging voltage | 12 V |
| Country of origin | Germany |
| Power source type | AC |
| Brand compatibility | Hilti |
| Number of batteries included | 1 pc(s) |
| Number of batteries supported | 1 |
| LED indicators | Yes |
| Package depth | 45 mm |
| Package width | 70 mm |
| Package height | 37 mm |
| Package weight | 300 g |
| Battery size | B |
| Batteries included | No |
| Operating temperature (T-T) | 0 - 60 °C |
| Number of shipping (inner) cases per master (outer) case | 15 pc(s) |
Weight and Dimensions| Depth | 90 mm |
|---|---|
| Width | 137 mm |
| Height | 60 mm |
| Battery weight | 50 g |
To Next Page
