*2153083*
2153083 English 9
1. If necessary, loosen the securing bolts until the toothed discs no longer mesh and are
thus free to rotate relative to each other.
2. Fold out the handlebar and adjust it to suit your body height so that you can steer the
trolley easily with your hands on the grips.
3. Tighten the retaining bolts securely.
4. Fold out the cutting line indicator.
5. Fit 2 weights at the front and 2 weights at the rear of the floor saw trolley.
6. Bring the pointer of the cutting line indicator into the working position. → page 10
Printed: 07.05.2019 | Doc-Nr: PUB / 5492449 / 000 / 00
To Next Page
Loading...
Need help?
General
