*2153083*
2153083 English 3
Diameter
Do not dispose of electric tools, machines or appliances together with house-
hold waste.
Read the operating instructions
Warning: risk of cutting injury (feet)
Warning: risk of cutting injury (hands)
Do not move the floor saw away from the cutting area until the saw blade has
stopped rotating
Wear ear protection
Wear eye protection
Wear safety shoes.
Wear protective gloves
1.4 Product information
Hilti products are designed for professional use and may be operated, serviced and
maintained only by trained, authorized personnel. This personnel must be informed of
any particular hazards that may be encountered. The product and its ancillary equipment
may present hazards when used incorrectly by untrained personnel or when used not as
directed.
The type designation and serial number are printed on the type identification plate.
▶ Write down the serial number in the table below. You will be required to state the
product details when contacting Hilti Service or your local Hilti organization to inquire
about the product.
Product information → page 3
Product information
Floor saw trolley DSF 1030TS
Generation 01
Serial no.
2 Safety
2.1 Safety instructions, floor saw trolley
WARNING! For use of the equipment as a floor saw, the safety instructions in the
operating instructions for the electric wall saw to be used and for the corresponding
remote control unit must also be observed.
▶ Use the trolley only when it is in perfect working order.
▶
Never tamper with or modify the trolley or the floor saw in any way.
▶ Operate the floor saw only with the blade guard correctly fitted. Never remove the
front section of the blade guard except when absolutely necessary for making a corner
cut.
▶ Do not touch rotating parts – risk of injury!
Printed: 07.05.2019 | Doc-Nr: PUB / 5492449 / 000 / 00
To Next Page
Loading...
Need help?
General
