What to do if my Hilti Power Tool remains compressed?
If the tool remains compressed (doesn't extend to its original state after use), it's likely fouled with dirt and residues. Cleaning the tool should resolve this issue.
Why is there nail breakage when using my Hilti DX 351-CT?
Nail breakage can occur if the driving power is too low. To correct this, increase the driving power or use a more powerful cartridge.
How to remove a stuck cartridge strip from my Hilti DX 351-CT Power Tool?
If the cartridge strip cannot be removed, allow the tool to cool. This issue may arise if the tool is damaged or has overheated due to an excessively high fastener driving rate.
Why are Hilti Power Tool cartridges not transported?
Cartridges may not be transported if the cartridge strip is damaged. If this is the case, change the cartridge strip.
General| Brand | Hilti |
|---|---|
| Model | DX 351-CT |
| Category | Power Tool |
| Language | English |
Essential safety guidelines to prevent injuries and ensure safe operation of the tool.
Step-by-step guide for assembling the fastening tool and its components.
Steps for driving a fastener, including safety precautions for electrical hazards.
Troubleshooting steps for when the tool jams or does not extend properly.
Procedure for addressing misfires when the tool is hot.
Troubleshooting steps for misfires when the tool is at operating temperature.
Guidelines for cleaning and maintaining the fastening tool using Hilti-approved accessories.
Steps for regular maintenance, checks, and replacement of worn parts.
Lists common issues with the tool, their causes, and corrective actions.
Addresses malfunctions related to fasteners, such as bending or depth variation.
To Next Page
