Hilti DX 76 User Manual

202947
Operating instructions en
Mode d’emploi fr
Manual de instrucciones es
Manual de instruções pt
DX 76
Printed: 17.04.2014 | Doc-Nr: PUB / 5126191 / 000 / 02

Hilti DX 76 Specifications

General

Brand	Hilti
Model	DX 76
Category	Power Tool
Language	English

Summary

Safety Instructions

Basic Information Concerning Safety

Using Cartridges

Guidelines for selecting and using appropriate Hilti cartridges to ensure safety.

Personal Safety

Emphasizes user alertness, correct posture, and avoiding distractions during operation.

Use and Care of Powder-Actuated Fastening Tools

Covers proper usage, handling, and care procedures for the fastening tools.

Work Area Safety

Outlines requirements for a safe and well-lit work environment, suitable materials, and tidiness.

Mechanical Safety Precautions

Details precautions related to fastener selection, tool components, and proper assembly.

Danger of Explosion

Warns about potential explosion hazards and proper cartridge handling.

Personal Protective Equipment

Specifies essential PPE for users and bystanders during tool operation.

Technical Data

Before Use

Check the Tool

Operation

Operation

General guidelines and important notes for operating the fastening tool safely.

Loading Fastener Strips in the Magazine

Instructions on how to properly load fastener strips into the tool's magazine.

Driving Fasteners with the Magazine Tool

Unloading the Tool

Removing Cartridges from the Tool

Removing Fastener Strips from the Tool

Driving Fasteners Using the Single Fastener Guide (Accessory)

Inserting the Fastener in the Single-Fastener Tool

Selecting the Cartridge

Inserting the Cartridge Strip

Driving Fasteners with the Single-Fastener Tool

Checking and Adjusting Fastener Driving Depth

Care and Maintenance

Care of the Tool

Maintenance

Checking the Piston, Changing the Piston / Piston Stopper

Cleaning the Piston Guide

Troubleshooting

Cartridges Are Not Transported

Addresses issues where cartridge strips are not being transported correctly by the tool.

Cartridge Strip Can't Be Removed

Provides solutions for situations where the cartridge strip is stuck or cannot be removed.

Cartridge Doesn't Fire

Offers remedies for the tool failing to fire a loaded cartridge.

Fastener Penetrates Too Deeply (Inadequate Fastener Stand-off)

Solutions for fasteners driven too deep into the base material.

Fastener Doesn't Penetrate Deeply Enough (Excessive Fastener Stand-off)

Remedies for fasteners not driven deep enough into the base material.

Fastener Stand-off (Head Projection) Varies Considerably

Addresses inconsistent fastener head projection from the surface.

Shear Breakage

Solutions for fasteners breaking during the driving process.

The Tool Remains Compressed (Doesn't Extend When Pressure Is Released)

Troubleshooting steps for when the tool does not return to its ready state.

The Tool Can't Be Fired

Steps to resolve issues preventing the tool from firing.

No Fastener Is Driven

Solutions for when no fastener is driven into the material.

The Fastener Guide Can't Be Screwed on to the Tool Fully

The Piston Can't Be Fitted

The Piston Guide Can't Be Fitted

Stiff Cycling Action

Health and Safety of the Operator