Hilti PD 40 - General Information; Safety Notices and Their Meaning; Pictograms and Warning Signs

PD 40 laser range meter
It is essential that the operating instructions
are read before the tool is operated for the
first time.
Always keep these operating instructions
together with the tool.
Ensure that the operating instructions are
with the tool when it is given to other
persons.
Contents Page
1. General information 17
2. Description 18
3. Insert tools, accessories 22
4. Technical data 22
5. Safety rules 23
6. Before use 24
7. Operation 28
8. Care and maintenance 30
9. Troubleshooting 31
10. Disposal 32
11. Manufacturer’s warranty ಣ tools 32
12. EC declaration of conformity 33
1 These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the foldಣout
cover pages. Keep these pages open while studying
the operating instructions.
In these operating instructions, the designation “the
tool” always refers to the PD 40 laser range meter.
Parts, operating controls and indicators 1
@
On/off button
;
Side measure button
=
Graphic display
%
Measure button
&
Delete (clear) button
(
Horizontal bubble
)
Area button
+
Folding spike
§
{/೥" thread for PDA 71 measuring extension
/
Rear contact points
:
Minus button
·
Plus button
$
Reference button
£
Laser exit lens
|
Receiving lens
1. General information
1.1 Safety notices and their meaning
DANGER
Draws attention to imminent danger that could lead
to serious bodily injury or fatality.
WARNING
Draws attention to a potentially dangerous situation
that could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation
that could lead to slight personal injury or damage to
the equipment or other property.
NOTE
Draws attention to an instruction or other useful
information.
1.2 Explanation of the pictograms and other
information
Warning signs
General
warning
en
17