What to do if my Hilti SF 10W-A22 Drill doesn't run?
If your Hilti Drill doesn't run, it might be due to the battery not being fully inserted. Ensure it's properly engaged by pushing it in until you hear a double click. Alternatively, the battery might be low. Try changing it and charging the depleted battery.
Why is the on/off button on my Hilti SF 10W-A22 Drill locked?
If the on/off button of your Hilti Drill is locked, it's likely because the forward/reverse selector switch is in the middle position. To unlock it, push the forward/reverse switch to either the left or the right.
General warnings for safe operation, work area safety, and avoiding hazards.
Warnings related to plugs, grounding, water exposure, and cords.
Guidance on staying alert, PPE, preventing unintentional starting, and proper attire.
Instructions on using the correct tool, maintenance, and storage for safety.
Guidelines for safe handling, charging, and use of Li-ion batteries to prevent hazards.
Safety instructions for general drilling operations and using long drill bits.
Precautions for using screwdrivers, checking cables, and handling dust.
Comprehensive safety instructions for handling Li-ion batteries to prevent injury, fire, or explosion.
Lists and illustrates all components of the drill/driver and battery, including part numbers.
Step-by-step guide on how to properly insert the battery for use.
Instructions on how to safely detach the battery from the power tool.
Guidance on charging the battery, including reading charger instructions and ensuring clean contacts.
Steps for performing drilling operations, including setting torque and direction.
A table listing common issues, their possible causes, and recommended solutions.
Lists common product faults, potential causes, and actions to resolve them.
To Next Page
General
