English 9
5.1.7 Removing the accessory tool
1. Set the forward/reverse switch to the middle position or remove the battery from the power tool.
2. Open the keyless chuck.
3. Pull the accessory tool out of the keyless chuck.
5.2 Types of work
ATTENTION
Risk of damage by incorrect handling!
▶ Do not operate the switches for direction of rotation and/or function selection during operation.
Observe the safety instructions and warnings in this documentation and on the product.
5.2.1 Setting forward or reverse rotation
▶ Set the forward/reverse switch to the desired direction of rotation.
➥ An interlock prevents switching while the motor is running. In the middle position the switch is locked
(safety lock).
5.2.2 Selecting the gear
▶
Select the gear.
5.2.3 Switching on
▶ Press the control switch.
➥ Speed can be controlled steplessly right up to maximum by varying how far the control switch is
pressed in.
5.2.4 Switching off
▶ Release the control switch.
Printed: 24.09.2018 | Doc-Nr: PUB / 5152424 / 000 / 05
To Next Page
Loading...
Need help?
General
