Hilti SF 8H-A22 User Manual

English 9
)
Rating plate
+
Grip
§
Belt hook (optional)
/
Battery state of charge indica-
tor
:
Release button with additional
function (charge state display
activation)
3.2 Intended use
SF 14-A
The SF 14-A is a hand-held cordless drill / driver. It is designed for driving
and removing screws and for drilling in steel, wood and plastic.
SFH 14-A
The SFH 14-A is a hand-held cordless drill / driver. It is designed for
drilling in steel, wood and plastic, for hammer drilling in cellular concrete
and masonry, and for driving and removing screws.
▶ Use only Hilti Li-ion batteries of the B14 series with this product.
▶ Use only the Hilti battery chargers of the C4/36 series for these batteries.
3.3 Overload and overheating protection
The power tool is equipped with an electronic system to protect against
overloading and overheating. The power tool switches itself off automatically
in the event of overloading or overheating. After releasing the control switch,
the power tool may not restart immediately when the switch is pressed again
(while the power tool is cooling down).
Overloading or overheating are not indicated by the charge status
display.
3.4 Liion battery display
The charge status of the Li-ion battery and malfunctions of the power tool are
indicated by the display on the Liion battery. The charge status of the Liion
battery is displayed after pressing one of the two battery release buttons.
Status Meaning
4 LEDs light up. Charge status: 75 % to 100 %
3 LEDs light up. Charge status: 50 % to 75 %
2 LEDs light up. Charge status: 25 % to 50 %
1 LED lights up. Charge status: 10 % to 25 %
1 LED flashes, the power tool is in
working order.
Charge status: < 10 %
1 LED flashes, the power tool is not
in working order.
The battery has overheated or is
completely discharged.
Printed: 02.05.2019 | Doc-Nr: PUB / 5152170 / 000 / 03

Hilti SF 8H-A22 Specifications

General

Brand	Hilti
Model	SF 8H-A22
Category	Drill
Language	English