Hilti SF 8H-A22 User Manual

10 English
Status Meaning
4 LEDs flash, the power tool is not
in working order.
The power tool is overloaded or has
overheated.
Battery charge status cannot be displayed while the control switch is
pressed and for up to 5 seconds after releasing the control switch.
If the battery display LEDs blink, please observe the instructions given
in the Troubleshooting section.
3.5 Items supplied
Drill / driver, side handle, operating instructions.
Spare parts, consumables and accessories approved by Hilti for use
with the product can be found at your local Hilti Center or online at:
www.hilti.group
4 Technical data
4.1 Technical data
SF 14-A SFH 14-A
Rated voltage
14.4 V 14.4 V
Weight
2.3 kg 2.4 kg
Speed in 1st gear
0 /min …
400 /min
0 /min …
400 /min
Speed in 2nd gear
0 /min …
1,300 /min
0 /min …
1,300 /min
Speed in 2nd gear
0 /min …
2,250 /min
0 /min …
2,250 /min
Torque
2 Nm …
12 Nm
2 Nm …
12 Nm
Hammering speed when drilling in 3rd
gear
•/• 40,500 /min
Hammer drilling in masonry (max. length
100 mm)
•/• 4 mm …
12 mm
Ambient temperature for operation
−17 ℃ …
60 ℃
−17 ℃ …
60 ℃
Storage temperature
−20 ℃ …
70 ℃
−20 ℃ …
70 ℃
Printed: 02.05.2019 | Doc-Nr: PUB / 5152170 / 000 / 03

Hilti SF 8H-A22 Specifications

General

Brand	Hilti
Model	SF 8H-A22
Category	Drill
Language	English