Why my Hilti Power Screwdriver doesn't run?
If your Hilti Power Screwdriver doesn't run, it might be due to the battery not being fully inserted. Ensure the battery is pushed in until you hear a distinct double click. Another possible cause is a low battery. Try changing the battery and charging the empty one.
What to do if running speed suddenly drops considerably on Hilti Power Screwdriver?
If the running speed of your Hilti Power Screwdriver suddenly drops considerably, the battery may be low. Try changing the battery and charging the depleted one.
Why Hilti Power Screwdriver or the battery becomes very warm?
If your Hilti Power Screwdriver or its battery becomes very warm, immediately switch off the power tool, remove the battery, keep it under observation, and allow it to cool down. This could be due to an electrical fault or because the tool is overloaded, exceeding its application limits. Consider selecting a more suitable power tool for the task.
How to unlock the control switch on Hilti Power Screwdriver?
If the control switch of your Hilti Power Screwdriver can’t be pressed because it's locked, the forward/reverse selector switch is likely in the middle position. Push the forward/reverse switch to the left or right to unlock it.
Why does the battery run down quickly on Hilti Power Screwdriver?
If the battery on your Hilti Power Screwdriver runs down more quickly than usual, it could be due to very low ambient temperature. Allow the battery to warm up slowly to room temperature.
What to do if the battery doesn’t engage with an audible double click on Hilti Power Screwdriver?
If the battery of your Hilti Power Screwdriver doesn’t engage with an audible double click, the retaining lugs on the battery might be dirty. Clean the retaining lugs and push the battery in until it engages. If the problem persists, contact Hilti Service.
General| Product type | Impact wrench |
|---|---|
| Product color | Black, Red |
| Drive size | 1/2 \ |
| Torque (max) | 185 N⋅m |
| Idle speed (max) | 2300 RPM |
| Power source | Battery |
| Battery voltage | 14 V |
| Carrying case | Yes |
| Impact rate | 3400 bpm |
Weight and Dimensions| Weight | 1300 g |
|---|
Information regarding the purpose and recommended use of the operating instructions.
Details on signal words (DANGER, WARNING, CAUTION) and common symbols found in the document.
Details product types, serial number, and generation for identification and service inquiries.
Essential safety instructions for operating power tools, covering work area, electrical, and personal safety.
Specific personal safety measures for screwdriver operation, including grip, protective gear, and workpiece checks.
Identifies key components of the product, including socket, illumination, and selector switch.
Detailed specifications for SID and SIW impact wrench models, including voltage, weight, and speed.
Steps and precautions for safely charging the Li-ion battery.
How to select the desired torque setting using the indicated button.
Procedure for choosing the direction of rotation for the tool.
How to activate the tool and control its speed.
Guidelines for cleaning and maintaining the power tool and its Li-ion batteries.
Procedures for checking tool condition, function, and repair needs.
Safety precautions for transporting and storing the tool and batteries.
Common problems, their possible causes, and recommended actions to resolve them.
Proper procedures for disposing of Li-ion batteries and other product components.
To Next Page
