To Next PageTo Next Page
Need help?Do you have a question about the Hilti UH 650 and is the answer not in the manual?
Explains the meaning of warning and caution statements in the manual.
Displays warning and obligation signs used throughout the manual.
Identifies where to find the tool's type designation and serial number.
Details the intended applications and limitations of the hammer drill.
Describes the quick-release and key-type chuck options.
Outlines the function selector, speed, and forward/reverse switches.
Explains the side handle, grip features, and standard supplied items.
General safety advice to prevent electric shock, injury, or fire during operation.
Guidelines for maintaining a safe work environment and preventing accidents.
Covers general safe operating practices and tool handling.
Details safety measures related to moving parts and tool integrity.
Outlines precautions to prevent electric shock and hazards from cords and connections.
Warns about hot surfaces and the need for protective gloves.
Advises on wearing breathing protection when dust is generated.
Specifies that the tool is for professional use by trained personnel.
Lists essential PPE like eye protection, hard hat, and gloves.
Instructions on how to attach and position the side handle.
Steps for preparing the tool before operation, including power connection.
Guide on setting the depth gauge for accurate drilling.
Procedures for opening and closing the quick-release chuck.
Instructions for operating the key-type chuck.
Explains how to use the 2-speed gear selector switch.
Steps for performing rotary drilling operations.
Steps for performing hammer drilling operations.
Details on using the electronic speed control and trigger.
How to activate and deactivate the lockbutton for continuous running.
How to select the direction of rotation using the switch.
Advice on cleaning and protecting drill bits and other insert tools.
Torque specifications for tightening the chucks.
How to clean the tool's casing and ventilation slots.
Regular checks for damage and proper functioning of parts.
Verifying protective equipment and part functionality after service.
Lists common problems and their solutions for the tool.
Guidelines for recycling the tool and separating its components.
General
