Hilti UH 700 - User Manual

56 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

UH 700

English 1

Français 11

Español 23

Português 35

Table of Contents

Questions and Answers

J
Jessica JenkinsAug 11, 2025
What to do if my Hilti Drill does not start?
- J
  jacksonmargaretAug 11, 2025
  If your Hilti Drill doesn't start, there could be a few reasons. First, check for an interruption in the electricity supply by plugging in another electric tool to see if it works. If the power supply is OK, the supply cord or plug may be defective and need to be checked and replaced by a trained electrical specialist. Finally, an electronic fault could also be the cause, and this should also be checked and fixed by a specialist.
R
Rose HickmanAug 20, 2025
Why my Hilti Drill does not develop full power?
- B
  bradley15Aug 20, 2025
  If your Hilti Drill isn't developing full power, it might be due to an inadequate extension cord. Try using an extension cord with an adequate conductor cross section. Also, make sure that you fully press the control switch.
M
Mallory SandovalAug 31, 2025
What to do if the drill bit makes no progress on my Hilti UH 700 Drill?
- B
  Brenda OliverAug 31, 2025
  If the drill bit on your Hilti Drill makes no progress, check whether the product has been set to reverse rotation and set the product to forward rotation. Also, the drill bit could be blunt or damaged, so try sharpening or replacing it.

Hilti UH 700 Specifications

General

Brand	Hilti
Model	UH 700
Category	Drill
Language	English

Related product manuals

Preview: Hilti DD 150-U

Preview: Hilti TE 25

Preview: Hilti DD 250

Preview: Hilti SF 2-A

Preview: Hilti SF 2H-A

Preview: Hilti SF 2-A12

Preview: Hilti SF 4-A22

Preview: Hilti SF 6-A22

Preview: Hilti SSH 6-A22

Hilti SSH 6-A22

Preview: Hilti TE 76-ATC

Hilti TE 76-ATC