X-DI 64 51 Appendix
HI 801 177 E 4.00 Page 47 of 50
Index of Figures
Figure 1: Sample Type Label 11
Figure 2: Block Diagram 12
Figure 3: Indicators 13
Figure 4: Views 16
Figure 5: Coding Example 19
Figure 6: Connector Boards with Screw Terminals 20
Figure 7: Connector Boards with Cable Plug 23
Figure 8: System Cable X-CA 003 01 n 25
Figure 9: Inserting the Connector Board 28
Figure 10: Securing the Connector Board with Captive Screws 29
Figure 11: Mounting and Removing a Module 31
Figure 12: Wiring with Contact Maker or Two-Wire Proximity Switch 38
Figure 13: Wiring of a Digital Signal Source with Electrically Isolated Supply 38
Figure 14: Wiring of a Digital Signal Source with Non-Electrically Isolated Supply 39
Figure 15: Redundant Wiring with Contact Maker or Two-Wire Proximity Switch 39
Figure 16: Redundant Wiring of a Digital Signal Source with Electrically Isolated Supply 40
Figure 17: Connection via Field Termination Assembly 40
To Next Page
Loading...
