UNPACKING YOUR FAN
UNPACK YOUR FAN AND CHECK THE CONTENTS.
04
|
hinkley.com
HOVER PACKAGE CONTENT
1 Blade Set of 3 BL900760Fxx
2
Hanging Bracket
3
Ceiling Canopy and Trim Ring
4
5
6
7
8
9
10
11
12
13
1
6
13
3
5
8
10
9
2
11
• Do not discard the carton. If warranty replacement or repair is ever necessary, the fan should be returned in original packing.
Remove all parts and hardware. Do not lay motor housing on its side, or the decorative housing may shift, be bent or damaged.
• Examine all parts. You should have the following:
NOTE: Design of parts shown above may look slightly different for
your specific model of fan.
7
4
Downrod Asm.
Yoke Cover
Adapter Plate
16W LED Assembly
Glass Shade
Receiver Incl. 5 Wire Nuts
Hardware Bag
Ball Moisture Cover
Fan Housing with Motor
*Remove rubber shipping
supports around motor, if
applicable. Save the screws.
Bracket Mounting Hardware
(wood screws, screws, lock
washers, star washers, flat washers,
wire nuts),
Blade to Motor Screws and
Lock Washers and Flat Washers.
Balance Kit,
Safety cable hardware
(wood screw, flat washer)
CA900752Fxx
In Hardware Bag
DR94016Fxx
YC900752Fxx
E900752LED
X
X
GL900752OPET
CNW900760
MH900752Fxx
XX=FAN FINISH
Cradle A, Wall Plate, Face Plate,
2 Mounting Screws,
Wall Control w/2032 Battery,
Cradle B (for flat wall use only)
12
+
980014FWH-R
To Next Page
Loading...
