UNPACKING YOUR FAN
UNPACK YOUR FAN AND CHECK THE CONTENTS.
04
|
hinkley.com
HOVER FLUSH PACKAGE CONTENT
1 Blade Set of 3 BL900852Fxx
RG900852Fxx
2 Mounting Bracket
Adapter Plate
Decorative Ring
3
4
5
6
7
8
9
10
1
4
10
7
2
8
• Do not discard the carton. If warranty replacement or repair is ever necessary, the fan should be returned in original packing.
Remove all parts and hardware. Do not lay motor housing on its side, or the decorative housing may shift, be bent or damaged.
• Examine all parts. You should have the following:
NOTE: Design of parts shown above may look slightly different for
your specific model of fan.
6
5
3
Receiver Incl. 5 Wire Nuts
16W LED Assembly
Glass Shade
Hardware Bag
Fan Housing with Motor
*Remove rubber shipping
supports around motor, if
applicable. Save the screws.
Bracket Mounting Hardware
(wood screws, screws, lock
washers, star washers, flat washers,
wire nuts),
Blade to Motor Screws
w/Lock Washers and Flat Washers,
Balance Kit,
Safety cable hardware
(wood screw, flat washer)
E900852LED
X
X
X
MH900852Fxx
GL900852ETCH
CNW900852
XX=FAN FINISH
Cradle A, Wall Plate, Face Plate,
2 Mounting Screws,
Wall Control w/2032 Battery,
Cradle B (for flat wall use only)
9
+
980014FWH-R
To Next Page
Loading...
