Hioki 3801-50 - Pulse Width Measurement

27
Chapter 6 Summary of SCPI Commands
Summary of SCPI
Commands Chapter 6
Command Parameter Description
CONFigure?
[@2] Query the function of the display.
CONFigure
Configure the meter to perform specified
measurement.
:VOLTage
Set the voltage measurement.
(Only 3801-50)
:AC
[<range>]
:DC
[<range>]
:ACDC
[<range>]
:CURRent
Set the current measurement.
(Only 3801-50)
:AC
[<range>]
:DC
[<range>]
:ACDC
[<range>]
PERC
:FCOUnter:PREScale
[<0|100>]
Set the frequency counter prescaling. (Only
3801-50)
:FREQuency
[<range>] Set the meter to frequency measurement.
:PULSe
Set the pulse measurement.
:PWIDth
[<range>] Positive pulse width
:NWIDth
[<range>] Negative pulse width
:PDUTycycle
Positive pulse duty ratio
:NDUTycycle
Negative pulse duty ratio
:CAPacitance
[<range>] Set the capacitance measurement .
:RESistance
[<range>] Set the resistance measurement.
:CONTinuity
[<range>]
Set the resistance measurement with the
continuity test.
:CONDuctance
Set the conductance measurement.
:DIODe
Set the diode measurement.
:TEMPerature
[<K|J>] Set the temperature measurement.