Need help?Do you have a question about the Hioki CM3289 and is the answer not in the manual?
General| Type | Clamp Meter |
|---|---|
| AC Current Measurement Range | 0.1 A to 1000 A |
| Battery Life | Approx. 200 hours |
| AC Current Accuracy | ±1.5%rdg ±5dgt |
| Continuity | Buzzer sounds at 50 Ω or less |
| Frequency characteristics (AC current / voltage) | 45 Hz to 1 kHz |
| Display | LCD |
| Jaw diameter | 33 mm |
Crucial safety information, hazard levels, and symbol meanings for instrument use.
Provides definitions for various safety and operational symbols found on the instrument.
Highlights mandatory actions for safe operation and adherence to standards.
Details electrical measurement categories (CAT) and their associated safety requirements.
Critical warnings detailing immediate risks of death or serious injury.
Important warnings about potential hazards, short circuits, and proper test lead usage.
Advisories against inappropriate environments to prevent damage or accidents.
Emphasizes insulation checks, correct sleeves, and safe electrical handling practices.
Cautions regarding foreign objects, battery handling, and low battery indicators.
Verifies test lead integrity and proper operation of resistance/continuity tests.
Advice on checking the battery level and replacing it if low.
Steps for cleaning the instrument's jaw surfaces, body, and LCD display.
Detailed steps and required tools for inserting or replacing the battery.
Explains power saving, auto-range, and manual-range features.
How the instrument indicates when a measurement exceeds the set range.
Labels for the front and rear components of the clamp meter.
Identification of the components making up the test leads.
Identification of parts for the optional AC flexible current sensor.
Defines terms like 'rdg.' (reading) and 'dgt.' (digit) used in accuracy specifications.
Details operating environment, temperature, and humidity requirements.
Covers storage, drop-proof, dimensions, mass, and warranty period.
Lists standard accessories and optional items available for the instrument.
Covers maximum input current, voltage, and overload protection.
Details rated voltage, AC measurement method, and display update rate.
Information on noise rejection, crest factor, and zero-display range.
Explains the impact of conductor position on measurement accuracy.
Specifies maximum conductor diameter, cable sectional diameter, and output cable length.
Covers display count, battery warning, and conditions for guaranteed accuracy.
Detailed accuracy specifications for AC current measurements using the jaw.
Detailed accuracy specifications for AC current measurements using a flexible loop.
Accuracy specifications for AC voltage measurements across various ranges and frequencies.
Accuracy specifications for DC voltage measurements across various ranges.
Accuracy specifications for measuring resistance across different ranges.
Accuracy and specifications for the continuity check function.
Details the warranty period, coverage, and exclusions for product defects.
Instructions for making warranty claims and important notes for users.
To Next Page
