Hioki CM4373 User Manual

12
Insert/Replace Batteries
Insert/Replace Batteries
WARNING
• To prevent electric shock, disconnect test leads before inserting or replacing
the batteries.
• Handle and dispose of batteries in accordance with local regulations.
• To prevent instrument damage or electric shock, use only the screw for
securing the battery cover in place that are originally installed. If you have
lost a screw or nd that a screw is damaged, please contact your Hioki
distributor for a replacement.
• The
indicator lights up when the battery charge diminishes. Replace the batteries as
soon as possible.
The batteries may die if the backlight turns on or the buzzer sounds.
• After use, be sure to turn off the instrument.

Hioki CM4373 Specifications

General

Model	CM4373
Category	Clamp Meter
True RMS	Yes
Bluetooth	Yes
Continuity	Yes
Diode	Yes
Display	LCD
Safety Standards	CAT IV 600 V, CAT III 1000 V
Type	Digital
AC Voltage	1000 V
DC Voltage	1000 V
Resistance	60.00 MΩ
Operating Temperature	-25 °C to 65 °C
Power Supply	2 x AA batteries