Hioki CM4373 User Manual

4
Safety Notes
Safety Notes
This instrument is designed to conform to IEC 61010 Safety Standards, and has been
thoroughly tested for safety prior to shipment. However, using the instrument in a way not
described in this manual may negate the provided safety features.
Before using the instrument, be certain to carefully read the following safety notes.
DANGER
Mishandling during use could result in injury or death, as well as damage to the
instrument. Be certain that you understand the instructions and precautions in
the manual before use.
WARNING
With regard to the electricity supply, there are risks of electric shock, heat
generation, re, and arc ash due to short circuits. If persons unfamiliar with
electricity measuring instruments are to use the instrument, another person
familiar with such instruments must supervise operations.

Hioki CM4373 Specifications

General

Model	CM4373
Category	Clamp Meter
True RMS	Yes
Bluetooth	Yes
Continuity	Yes
Diode	Yes
Display	LCD
Safety Standards	CAT IV 600 V, CAT III 1000 V
Type	Digital
AC Voltage	1000 V
DC Voltage	1000 V
Resistance	60.00 MΩ
Operating Temperature	-25 °C to 65 °C
Power Supply	2 x AA batteries