Hioki CM4373 User Manual

5
Safety Notes
WARNING
Protective gear
This instrument is measured on a live line. To prevent electric shock, use
insulated protective wear such as rubber gloves and rubber boots designed for
electrical work as well as a safety helmet as required by occupational health
and safety regulations.
Notation
In this document, the risk seriousness and the hazard levels are classied as follows.
DANGER
Indicates an imminently
hazardous situation that will
result in death or serious injury
to the operator.
IMPORTANT
Indicates information related to
the operation of the instrument
or maintenance tasks with
which the operators must be
fully familiar.
WARNING
Indicates a potentially hazardous
situation that may result in death
or serious injury to the operator.
Indicates prohibited actions.
CAUTION
Indicates a potentially hazardous
situation that may result in
minor or moderate injury to
the operator or damage to the
instrument or malfunction.
Indicates the action which
must be performed.

Hioki CM4373 Specifications

General

Model	CM4373
Category	Clamp Meter
True RMS	Yes
Bluetooth	Yes
Continuity	Yes
Diode	Yes
Display	LCD
Safety Standards	CAT IV 600 V, CAT III 1000 V
Type	Digital
AC Voltage	1000 V
DC Voltage	1000 V
Resistance	60.00 MΩ
Operating Temperature	-25 °C to 65 °C
Power Supply	2 x AA batteries