Hioki CM4373 User Manual

6
Safety Notes
Symbols afxed to the instrument
Indicates cautions and hazards.
When the symbol is printed on the
instrument, refer to a corresponding
topic in the Instruction Manual.
Indicates DC (Direct Current) or AC
(Alternating Current).
Indicates that dangerous voltage may
be present at this terminal.
Indicates DC (Direct Current).
Indicates that the instrument may be
connected to or disconnected from a
live conductor.
Indicates a grounding terminal.
Indicates a instrument that has been
protected throughout by double
insulation or reinforced insulation.
Indicates the Waste Electrical and
Electronic Equipment Directive (WEEE
Directive) in EU member states.
Indicates that the product incorporates
Bluetooth
®
wireless technology.
Indicates that the product conforms to
regulations set out by the EC Directive.

Hioki CM4373 Specifications

General

Model	CM4373
Category	Clamp Meter
True RMS	Yes
Bluetooth	Yes
Continuity	Yes
Diode	Yes
Display	LCD
Safety Standards	CAT IV 600 V, CAT III 1000 V
Type	Digital
AC Voltage	1000 V
DC Voltage	1000 V
Resistance	60.00 MΩ
Operating Temperature	-25 °C to 65 °C
Power Supply	2 x AA batteries