Hioki DT4254 - Page 101

93
Accuracy Table
• For 100 Hz with the lter ON, ±1.5% rdg. is added to the accuracy
specication between 40 Hz and 100 Hz and the accuracy is not specied
in 100 Hz or more.
• For 500 Hz with the lter ON, ±0.5% rdg. is added to the accuracy
specication between 40 Hz and 500 Hz and the accuracy is not specied
in 500 Hz or more.
*2: DT4256
16
Electric charge detection
Range
(detection sensitivity)
Detection voltage range
*1
Detection target
frequency
Hi 40 V AC to 600 V AC 50 Hz/60 Hz
Lo 80 V AC to 600 V AC 50 Hz/60 Hz
• During voltage detection, a continuous buzzer sounds and the red LED
lights up.
*1: In contact with the insulated wire that is equivalent to IV2 mm
2
.