101
Replacing Fuses
CAUTION
When replacing the fuse, do not allow foreign matter to
enter the instrument. It may cause a malfunction. Do not
remove the fuse using the tip of test lead L9207-10 supplied
with the instrument. The tip of the test lead may bend.
1
Remove the test leads
from the instrument.
2
Set the rotary switch to
OFF.
Screw
Rear
3
Using a Phillips
screwdriver, remove the
screw (1 location) from the
battery cover.
4
Remove the battery cover.
5
Replace the fuse.
6
Reattach the battery cover.
7
Secure the cover with the
screw.
To Next Page
Loading...
