21
Parts Names and Functions
Rear
Communication port
When the communication adapter
supplied with the optional DT4900-
01 Communication Package
is connected, the data can be
transmitted to the PC. (p. 72)
Stand
The instrument can be set on the
stand. (p. 32)
Test lead holder
The test lead can be held.
Battery cover
When replacing the batteries
(p. 26) or fuse (p. 100),
remove the cover.
See p. 26.
Strap hole
The optional Z5004 Magnetic
Strap can be attached. (p. 32)
Serial number label
It is necessary for production
control such as product
warranty.
Do not peel off the label.
To Next Page
Loading...
