Hioki DT4254 - Page 6

ii
3.4 Checking Continuity
(DT4252
,
DT4253
,
DT4255
,
DT4256) ............. 47
3.5 Measuring Diode
(DT4252
,
DT4253
,
DT4255
,
DT4256) ............. 48
3.6 Measuring Resistance
(DT4252
,
DT4253
,
DT4255
,
DT4256) ............. 49
3.7 Measuring Temperatures (DT4253)..............50
3.8 Measuring Electrostatic Capacities
(DT4252
,
DT4253
,
DT4255
,
DT4256) ............. 52
3.9 Measuring Current
(DT4252
,
DT4253
,
DT4256) ............................53
Measuring DC/AC Current ........................................ 53
3.10 Measuring AC Current Using Clamp-on
Probe
(DT4253
,
DT4255
,
DT4256) ................. 56
3.11 Checking the Electric Charge
(DT4254
,
DT4255
,
DT4256) ............................58
4 Using Instrument Conveniently 59
4.1 Selecting the Measurement Range ..............59
Measuring with the auto range .................................59
Measuring with the manual range .............................59
4.2 Retaining the Measured Value .....................60
Retaining the measured value manually (HOLD) .....60
Automatically retaining the measured value
when the value stabilizes (AUTO HOLD)..................61
4.3 Reducing the Effect of the Noise (FILTER) . 64
4.4 Checking the Maximum/Minimum/Average 66
4.5 Checking the Relative Value/Performing
Zero Adjustment ............................................ 67
Checking the relative value (REL) ............................67
Performing zero adjustment ......................................69