22
Display
6
Maximum value (p. 61)
Minimum value (p. 61)
7
(Unit) Each unit
8
The display update (sampling) is performed at SLOW
speed. (p. 59)
The lter function is activated. (p. 60)
The relative value display function is activated. (p. 63)
9
Auto range (p. 55)
Manual range (p. 55)
10
Maximum value in the peak measurement (p. 62)
Minimum value in the peak measurement (p. 62)
When
are displayed, / can be used to
change values.
Threshold of the continuity check (p. 42)
Threshold of the diode test (p. 43)
11
AC measurement
DC measurement
AC measurement + DC measurement
During the temperature measurement, the
temperature difference from the standard is displayed.
(p. 45)
Continuity check (p. 42)
Diode test (p. 43)
DT4281
Clamp current measurement (p. 51)
% conversion measurement of 4-20 mA (0-20 mA)
(p. 53)
(
DT4281
: DT4281 only,
DT4282
: DT4282 only)
To Next Page
Loading...
