Hioki DT4281 - Setting and Checking the System; Checking that All Indicators Are Displayed; Checking the Software Version of the Instrument

74
Setting and Checking the System
4.14 Setting and Checking the System
Checking that all indicators are displayed
Check that there is no missing indicator.
If any indicator is missing, stop using the instrument and send it for
repair.
Turn on the power while pressing
.
When is released, the measurement
display appears.
Checking the software version of the instrument
For repair or calibration, check the version if necessary.
Example: Ver 1.00
TEMP C
TEMP FVERSION
RESET
０－２０mA電源遮断断線（Ｋ熱電対）####
オートパワーセーブＯＦＦブザーＯＦＦメモリデータクリアメモリデータなし
Turn on the power while pressing
.
When is released, the measurement
display appears.
HIOKI DT4281A981-08