3.1 Overview of Communication
22
Printer can be connected to enable printing measurement values and screens.
Command control using the TCP/IP protocol is possible.
You can control the instrument with communication commands from a computer via the USB and LAN inter-
faces.
There are the following two communication methods. To enable communication, the communication condi-
tions need to be set on the instrument.
The instrument is communication class compatible.
Command control using the TCP/IP protocol is possible.
IM3523A
RS-232C communication (when connected to the Z3001) (p. 27)
LAN communication (when connected to the Z3002) (p. 30)
USB communication (p. 23)
LAN communication (p. 30)
To Next Page
Loading...
