Need help?Do you have a question about the Hioki IM3533 and is the answer not in the manual?
General| Brand | Hioki |
|---|---|
| Model | IM3533 |
| Category | Measuring Instruments |
| Language | English |
Details the instrument's capabilities, including measurement modes, speed, and accuracy.
Identifies and explains the purpose of the instrument's various parts and connectors.
Covers fundamental configurations like frequency, signal level, range, and speed.
Explains how to perform and configure DC resistance measurements, including temperature correction.
Details how to set up comparator and BIN measurements for quality evaluation.
Covers advanced configurations like range synchronization, contact check, and I/O settings.
Covers fundamental configurations for ANALYZER mode, including parameters, triggers, and display timing.
Steps for setting up panels and measurement conditions for continuous operation.
Details how to compensate for errors caused by floating impedance of test cables.
Explains how to compensate for residual impedance of test cables, effective for low impedance samples.
Covers saving measurement data, screen copies, and configuring header information.
Provides detailed information on measurement ranges, accuracy tables, and coefficients.
A guide to diagnosing and resolving common instrument issues and errors.
Lists possible error indications, their descriptions, and remedies.
Explains the principles and procedures for open and short circuit compensation.
To Next Page
