Hioki IM3533 - Configuring CONTINUOUS Measurement Application Settings; Setting the Display Timing

7.5 Configuring CONTINUOUS Measurement Application Settings
213
7
Chapter 7 CONTINUOUS Measurement Function
Set the display timing for during continuous measurement.
If the display timing is set to , the time for continuous measurement becomes long because the
screen is updated every time measurement is performed.
If it is set to to give priority to the measurement time, the screen update time becomes short.
7.5 Configuring CONTINUOUS
Measurement Application Settings
7.5.1 Setting the Display Timing
Procedure
CONTINUOUS Measurement Screen CONTINUOUS Measurement Application Settings
1
Press .
2
CONTINUOUS Measurement Application Settings
3
Display Timing Setting
Set the timing for display.
Sequentially displays after measurement of
each panel.
Displays all after continuous measurement is
finished.
4
Press to close the setting screen.