13.3 Printing
334
Before Printing
Verify that the instrument and printer settings (p. 333) are correct.
• Prints automatically after measurement completes.
• Since measurement data is printed automatically, it is recommended to print using an external trigger.
• When set to use an external trigger, pressing causes the measurement data to be
printed.
Prints the state when is pressed in the measurement screen.
13.3 Printing
When the Printing Method is Set to
When the Printing Method is Set to
When LCR Mode When ANALYZER Mode (IM3533-01 only)
When TRANSFORMER Mode
To Next Page
Loading...
