Hioki IM3533 - Setting Application Settings; Setting Measurement Conditions for; (Range Synchronization Function)

4.5 Setting Application Settings
120
This section describes how to set measurement conditions for individual measurement ranges.
4.5 Setting Application Settings
4.5.1 Setting Measurement Conditions for Individual
Measurement Ranges
(Range Synchronization Function)
Settings are the same as those described in "4.2 Setting Basic Settings of Measurement
Conditions" (p. 50).
Rdc
Measurement speed (DC), averaging settings (DC)
BASIC
Measurement speed (AC), averaging settings (AC), trigger delay, trigger
synchronous output function
Procedure
LCR Measurement Screen LCR Application Settings
1
Enables the range synchronization function.
Press
2
LCR Application Settings