Hioki IM3533 - System Settings Screen

1.3 Screen Configuration and Operation
25
1
Chapter 1 Overview
1.3.5 System Settings Screen
Procedure
1
Press .
2
Measurement Screen
To set the details of the system.
Interface type settings
Measurement screen is displayed.
Printer Setting (p. 331)
(Setting only available when the Z3001 is
installed.)
RS-232C Setting
(Ref to Communication Instruction Manual (LCR
Application Disk))
(Setting only available when the Z3001 is
installed.)
GP-IB Setting
(Ref to Communication Instruction Manual (LCR
Application Disk))
(Setting only available when the Z3000 is
installed.)
USB Setting
(Ref to Communication Instruction Manual (LCR
Application Disk))
(Standard setting)
LAN Setting
(Ref to Communication Instruction Manual (LCR
Application Disk))
(Setting only available when the Z3002 is
installed.)