Hioki IM3533 - Chapter 2 Measurement Preparations; Preparation Flowchart

2.1 Preparation Flowchart
29
2
Chapter 2 Measurement Preparations
Be sure to read the "Follow these precautions to ensure safe operation and to obtain the full benefits of the
various functions." (p. 5) before installing and connecting this instrument.
Refer to "Appendix10 Rack Mounting"(p. A15) for rack mounting.
Measurement
Preparations Chapter 2
2.1 Preparation Flowchart
9478 Sheath Type Temperature Probe
(Option)
• USB cable
• GP-IB cable (only when the Z3000 is connected)
• Printer (only when the Z3001 is connected)
(p. 331)
Connect the external interface (as needed)
4
• RS-232C cable (only when the Z3001 is connected)
• LAN cable (only when the Z3002 is connected)
• EXT I/O (p. 309)
Connecting the Power Cord (p. 31)
2
Installing the Instrument (p. 5)
Turning Power On (p. 35)
1
5
Make instrument settings
6
Connect to the test sample
After using the instrument, remove the test sample and turn off the power. (p. 35)
FrontRear
When measuring DC resistance, be sure to set the line frequency before performing measurement.
See "4.3.4 Setting the Line Frequency" (p. 87)
Check that the instrument’s power switch is turned off.
Connect measurement cables, optional Hioki probes or test fixture (p. 32)
3