5.3 Application Settings
191
5
Chapter 5 ANALYZER Function (IM3533-01)
In the event of the instrument malfunctioning, check "Before returning for repair" (p. 355).
If you do not know the cause of the problem, perform a system reset to restore the instrument to its factory
default settings.
A system reset can also be performed with the
*RST and :RESet communication commands.
See Description of communications commands on the included LCR Application Disk.
5.3.12 Initializing (System Reset)
• If the initialization screen cannot be displayed, perform a full reset (p. 359).
• Performing a system reset causes the instrument to return to its default factory settings.
Disconnect the measurement sample before performing a system reset.
Procedure
ANALYZER Application Settings
1
ANALYZER Measurement Screen
Press .
2
ANALYZER Application Settings
3
System Reset
Press to restore the factory
default settings and automatically redisplay
the measurement screen.
When you want to cancel the system reset:
Press .
To Next Page
Loading...
