Hioki IM3533 - Setting the DC Bias

4.2 Setting Basic Settings of Measurement Conditions
58
You can superimpose a DC voltage on the measurement signal during capacitor measurement.
4.2.4 Setting the DC bias
Procedure
LCR Measurement Screen LCR Basic Settings
1
Press .
2
LCR Basic Settings
3
DC Bias Setting
Select ON/OFF for the DC bias.
Disables DC bias.
Enables DC bias.
Press this button when using an external
DC bias unit.
The DC bias will be set to ON, and the bias
value will be set to 0.00 V.