Hioki IM3533 - Judging Measurement Results

4.4 Judging Measurement Results
100
The measurement results are compared to an arbitrarily set reference and then the judgment results are dis-
played. This function is useful for quality evaluation and the like.
There is comparator measurement which compares one judgment reference and the measurement values,
and BIN measurement which compares multiple judgment reference values (up to 10) and the measurement
values.
Use the following procedure to select and set one of the modes.
4.4 Judging Measurement Results
Setting the judgment mode
Judgment by comparator measurement and BIN mea-
surement is performed for the first parameter and third
parameter.
Therefore, set the measurement values you want to judge
for the first parameter and third parameter in advance.
See "4.1.2 Setting Display Parameters" (p. 47)
Judgment Target Result Display
First parameter Second parameter area
Third parameter Fourth parameter area
Procedure
LCR Measurement Screen
1
Application Settings
Press .
2
Application Settings