Hioki IM3533 - Setting the Upper or Lower Limit Value as a Percentage (%) Relative to a Reference Value (Percentage Mode)

6.3 Judging with Upper and Lower Limit Values (Comparator Measurement Mode)
203
6
Chapter 6 TRANSFORMER Function
2
Setting the Upper or Lower Limit Value as a Percentage (%) Relative to a
Reference Value (Percentage Mode)
Procedure
1
Press .
TRANSFORMER Measurement Screen
Press .
2
Comparator Condition Setting
Press and use the numeric keypad to
set the reference value.
3
Reference Value Setting
Settable range: -9.99999G to 9.99999G
Changing the unit (a/ f/ p/ n/ / m/ None/ k/ M/ G)
Step the units up.
Step the units down.
4
Press to confirm the reference value.