Hioki IM3536-01 - User Manual

To Next Page

IM3536 LCR METER

Instruction Manual

IM3536

LCR METER

July 2018 Revised edition 3

IM3536A981-03 18-07H

99 Washington Street

Melrose, MA 02176

Phone 781-665-1400

Toll Free 1-800-517-8431

Visit us at www.TestEquipmentDepot.com

Main Page

Table of Contents2
Introduction5
Verifying Package Contents5
Measurement Process10
Safety Information14
Operating Precautions16
Overview21
Product Overview and Features21
Names and Functions of Parts22
Screen Layout and Operation24
X84; Screen Transition Diagram24
X84; Viewing Measured Values (Measure- Ment Screen)26
X84; Select the Measurement Mode (MODE Screen)28
X84; Setting Detailed Settings such as Mea- Surement Conditions (SET Screen)29
X84; Checking Measurement Condition Set- Tings Information30
X84; Configuring Correction Functionality (ADJ Screen)31
X84; Configuring the Instrument's Interfaces, Setting the Time and Date, and Checking the System (SYS Screen)32
X84; Displaying and Manipulating Files on the USB Flash Drive (FILE Screen)33
Measurement Preparations35
Preparation Flowchart35
Pre-Operation Inspection37
Connecting the Power Cord38
Connecting the Measurement Cables, Probes, or Fixture39
Turning the Power on and off40
Setting the Date and Time42
Performing Measurements in LCR Mode43
Setting Display Parameters43
X84; to Perform DC Measurement (DC Resis- Tance Measurement)44
Viewing Measured Values45
Enlarging Display of Measurement Values46
Setting Measurement Condi- Tions (Basic Settings)47
X84; Required Settings48
X84; User-Configurable Settings59
X84; Measurement and Data Acquisition Timing70
X84; When Measuring Conductivity and Per- Mittivity72
Judging Measurement Results73
X84; Setting the Judgment Mode74
Based on One Judgment Standard)74
Judgment Standards)79
Setting Application Settings84
X84; Range Synchronization (Setting Mea- Surement Conditions for Individual Mea- Surement Ranges)84
X84; Waveform Averaging Function (Increas- Ing Measurement Precision or Measure- Ment Speed)87
X84; High-Z Reject Function (Detecting Contact Errors During 2-Terminal Measurement)89
X84; Contact Check Function (Detecting Poor Contact with the Sample During 4-Termi- Nal Measurement)90
X84; Memory Function (Saving Measurement Results)91
X84; Number of Effective Digits of the Mea- Surement Value92
X84; LCD Display Auto-Off (Power-Saving Mode)93
X84; Key Tones and Judgment Tones94
X84; Key-Lock Function (Disabling Key Operation)95
Using Continuous Measurement Mode97
Setting Which Panels to Use in Continuous Measurement97
Performing Continuous Measurement98
Checking Continuous Measurement Results98
Changing the Display Timing Setting (When You Wish to Shorten the Screen Update Interval)99
Setting the LCD Display Auto-Off (When You Wish to Save the Power)100
Error Correction101
Setting the Cable Length (Cable Length Correction)102
Open Correction103
X84; before Performing Open Correction103
X84; All Correction104
X84; Spot Correction107
Short Correction109
X84; before Performing Open Correction109
X84; All Correction110
X84; Spot Correction111
If Open or Short Correction Fails to Complete Normally113
Disabling Open and Short Correction Values115
Load Correction (Correcting Values to Match Reference Values)116
X84; Procedures for the Load Correction117
X84; to Reset the Correction Condition Settings123
X84; When Load Correction Fails to Complete Normally123
X84; Disabling Load Correction124
Correcting Measured Values with a User-Specified Correction Coefficient (Correlation Correction)125
Saving and Loading Measurement Condi- Tion and Correction Value Data127
Saving Measurement Conditions and Correction Values (Panel Save Function)128
Loading Measurement Condi- Tions and Correction Values (Panel Load Function)132
Changing a Panel Name133
Deleting a Panel134
Setting the System135
Setting the Interface (Controlling the Instrument from a Computer)136
Checking the Version of the Instrument136
Testing the System (Self Diagnosis)137
X84; Panel Test137
X84; Panel Calibration138
LED Status138
X84; ROM/RAM Test139
X84; Testing EXT I/O Input/Output Signals139
Using USB Flash Drive (Saving and Loading Data)141
Inserting and Removing a USB Flash Drive142
Checking the Contents of Files on a USB Flash Drive143
Formatting a USB Flash Drive144
Saving Measurement Data145
X84; Saving Measurement Data in Text145
X84; Saving a Copy of the Screen154
X84; to Specify the Save Folder156
Saving Settings Data157
X84; Saving Instrument Settings Other than Panels157
Panels (ALL SAVE Function)158
Loading Instrument Settings159
X84; Loading Settings Files or Panel Files159
Files (ALL LOAD Function)160
Checking the Contents of a File161
Deleting Files and Folders162
Creating Folders163
Displaying the USB Flash Drive Information164
External Control165
External Input/Output Connector and Signals166
Connectors166
X84; Instrument Connector Signal Assignments 162 &#X84; Input (IN) Signal Function Details171
X84; BCD Mode Function Details172
X84; Output Signals When Errors Occur174
Example Measurement Timing (Timing Charts)175
Internal Circuitry180
X84; Circuit Diagrams180
X84; Electrical Specifications182
X84; Connection Examples182
External I/O Settings184
X84; Setting the Delay Time (from Judgment185
X84; Disabling the Trigger Input During Mea- Surement and Setting the Trigger Input186
Output Time187
To BCD Mode) (LCR Mode Only)188
External Control Q&A189
Measurement Using a Computer190
Specifications191
General Specifications191
Environmental and Safety Specifications196
Accessories and Options197
Function Specifications197
Interfaces209
Measurement Range and Accuracy211
About Measurement Times and Measurement Speed221
Maintenance and Service225
Calibration, Inspection, Repair, and Cleaning225
X84; Calibrations225
X84; Inspection and Repair225
X84; Replaceable Parts and Operating Life- Times225
X84; Transporting the Instrument226
X84; Cleaning226
Troubleshooting227
X84; before Returning for Repair227
X84; Initializing (System Reset)232
X84; Performing a Full Reset (if You Are Unable to Perform a System Reset)233
Error Massage and Error Display234
Discarding the Instrument239
Formula241
External Noise245
Of Noise from the Power Line245
X84; Countermeasures against Noise from the Measurement Cables246
Appx. 5 Supplying DC Bias246
X84; How to Supply a DC Bias Voltage247
X84; How to Supply a DC Bias Current248
Equivalent Circuit Mode Appx.10250
Short Correction251
Instrument252
Appx. 10 Dimensional Diagram254
Appx. 11 Initial Settings Table255

Brand	Hioki
Model	IM3536-01
Category	Measuring Instruments
Language	English

Hioki IM3536-01 - User Manual

Table of Contents

Hioki IM3536-01 Specifications

Related product manuals