Hioki IM3536-01 - Measurement Preparations; Preparation Flowchart

31
2
Measurement Preparations
2.1 Preparation Flowchart
Before preparing for measurement, be sure to read “Operating Precautions” (p. 12).
Refer to “Appx. 9 Attaching Rack-mounting Hardware to the Instrument” (p. Appx.12) for rack mount-
ing.
(1) Installing the Instrument (p. 12)
(2) Connecting the Power Cord (p. 34)
(3) Connect measurement cables, optional Hioki probes or test xture to the measurement
connectors (p. 35)
Check that the instrument’s power switch is turned
off.
(4) Connect the external interface (as needed)
For more information about making RS-232C, GP-IB, USB, and LAN connections, see the Com-
munications Instruction Manual on the bundled LCR Application Disc.
External interface
RS-232C
GP-IB
USB
LAN
(5) Turning Power On (p. 36)
2 Measurement Preparations
2
Measurement Preparations