2.3 Connecting the Power Cord
31
2
Chapter 2 Measurement Preparations
Be sure to read the "Before Turning Power On" (p. 6), "About Handling of
Cords, Fixtures and Temperature probes" (p. 7) before connecting power.
Connect the power cord to the power inlet on the instrument, and plug it into an outlet.
2.3 Connecting the Power Cord
1
Check that the instrument’s power switch is turned off.
2
Connect a power cord that matches the line voltage to
the power inlet on the instrument. (100 V to 240 VAC)
3
Plug the other end of the power cord into an outlet.
Turn off the power before disconnecting the power cord.
Rear
Power inlet
To Next Page
Loading...
