Hioki IM3533 - Chapter 5 ANALYZER Function (IM3533-01); 5.1 About ANALYZER function

4.5 Setting Application Settings
141
4
Chapter 4 LCR Function
The instrument may not be able to display minute values using the set number of display dig-
its.
Use or to set the number of display
digits. (For each parameter)
3
Settable range: 3 to 6 digits
No. of Display Digits Setting
Setting
Value
Parameter
 D Q  Other
6 Up to three decimal places Up to five decimal places Up to second decimal place Up to three decimal places Up to 6 digits
5 Up to second decimal places Up to four decimal places Up to one decimal place Up to second decimal place Up to 5 digits
4 Up to one decimal place Up to three decimal places Up to zero decimal places Up to one decimal place Up to 4 digits
3 Up to zero decimal places Up to second decimal place Up to zero decimal places Up to zero decimal places Up to 3 digits
4
Press to close the setting screen.